TUFF Bullbars Australia is one of the leading Australian distributors and manufacturers of vehicle frontal protection systems and is nationally recognised, well-respected brand in the aftermarket accessory industry.
TUFF 2 POST BULLBAR
The 2 Post Bullbar is designed for those who require superior protection to the traditional city bullbar while combining stylish looks and lighter weights. The 2 Post Bullbar can be built with an Aerostyle bottom to offer increased clearance for off road adventures.
TUFF 3 POST BULLBAR
The 3 Post Bullbar is a good looking, strong bullbar designed on the same principals as the 5 and 4 Post, offering substantial protection in or outside rural areas of this large country of ours.
TUFF 4 POST BULLBAR
The 4 Post Bullbar is a reliable safety device designed to offer you comprehensive protection when travelling in remote or rural areas.
TUFF 5 POST BULLBAR
The 5 Post Bullbar is our most popular type of bullbar. It is a heavy duty product offering the ultimate protection for you, your passengers and vehicle. The 5 Post is the product of choice for people driving predominantly in the country. Where there are high numbers of Kangaroos and other fauna this is essential equipment. The 5 Poster is made of steel or alloy for popular makes and models. The 5 Post bullbar has been designed to withstand the most extreme operating conditions on earth with regard to animal collisions.
BRUSH RAILS + SIDE STEPS
To compliment your bullbar and protect the side of your vehicle, add our much copied but never bettered, Single and Double Brushrails. All our brushrails come with incorporated sidesteps, offering the maximum strength to protect your investment from a side-impact. TUFF Side steps only are also available for most makes and models. The extra width of the side steps can not only protect against side-impacts but can also deflect vegetation away from coming into contact with your vehicle. Our steps also have a lip to provide a better finish under the door sill while repelling dirt and mud.
TUFF EXTRA OPTIONS
- Sheeted sides
- Protector bars
- Mesh or no mesh
- Tube size
- Extra tags (UHF or for Lightbars)
- Fog Lights
- Front rack and tubes
- Hayman Reese tow point
- Mini posts
- Compatible option
The front face of a TUFFbar has been carefully designed to ensure that it does not lean outward from the vehicle. Aerial tabs and driving light mounts are fixed to the bullbar in a manner that prevents them from becoming dangerous projections. All accessory fixtures are positioned on the rear of all TUFFbars. The ends of TUFFbars are curved to wrap around the front of the vehicle. They do not protrude beyond the legal maximum width of the vehicle. The overall height of a TUFFbar has been designed to be practical and protective. Bars extending too high over the bonnet are not permitted.
AIR BAG COMPLIANT
A bullbar mounting system is the most important part of any design, and as every vehicle is different, our TUFF Heavy duty steel mounting systems are designed specifically to suit the vehicles chassis and the bullbar bolting onto it. All TUFF mounts are cut from 8 – 10mm steel plate and are designed and independently tested to ensure they are compatible with the vehicles standard safety equipment, without compromising the strength and performance of the TUFFbar. TUFFbars meet the requirements of ADR 69/00 (Vehicle Frontal Protection System Impact Test – Air Bag) and Compatibility Certificates are available on request.