Auto Electrical

The Ironman dual battery monitor displays the voltage levels of both batteries.

Weight : 22.5kg Application : Deep Cycle Dimensions : 305 x 171 x 225 mm A/H : 105 Voltage : 12V

Weight : 20kg Application : Deep Cycle Dimensions : 256 x 170 x 225 mm A/H : 80 Voltage : 12V

The Ironman 140 Amp Dual Battery Kit allows two batteries to be charged at the same time. When the engine is started and the main battery reaches 1...

Suits HU1300 & HU1301

The Ironman 270 Amp Dual Battery Kit allows two batteries to be charged at the same time. When the engine is started, the Ironman 4x4 module engage...

4 in 1 Switchmode Battery Charger 12 Volt 4 banks x 4amps, total 16amps 5 Stage Fully Automatic Charge, MCU controlled Charges all battery types ...

Ironman 4x4's DC to DC 40amp boost, 3 stage battery charger. With the new generation of vehicles it is important to ensure that auxilary battery ch...

Ironman 4x4's DC to DC Battery Charger with Solar Connection.

Pre-assembled 50 AMP charging connection kit to suit caravans, camper, boats, fridges and other high-powered devices. Install on either the tow ve...

Suits HU1300 & HU1301

Suits remote LCD display HU6526

Weight : 23.7kg Dimensions : 306 x 173 x 225 mm A/H : 95 Amps : 776

Weight : 23.7kg Dimensions : 306 x 173 x 225 mm A/H : 95 Amps : 775

The HULK Professional Series Smart 8 Switch panel is ideal for 4WD’s, SUV’s, Caravans and Trucks. This system allows you to control up to 8 differe...

The HULK Professional Series Smart 8 Switch panel is ideal for 4WD’s, SUV’s, Caravans and Trucks. This system allows you to control up to 8 differe...

Compatible with HU6620B • Input: 12V • Range: 10amp @ 12V • Includes internal fuse & weather resistant rubber seal • Plug has lock in poin...

• Input: 12-24V DC • Range: 20amp @ 12V 10amp @ 24V • Protective rubber cap • Hole size: 29mm • Socket has lock in points so plug stays in

Illumination Colour: Blue • Input: 12-24V DC • Range: 20amp @ 12V 10amp @ 24V • Protective rubber cap • Hole size: 29mm • Socket has lock in p...

Illumination Colour: Blue • Input: 12-24V DC • Range: 0-10amp • Hole size: 29mm • Sealing: IP66

• Input: 12-24V DC • Range: 0-100amp • Sealing: IP66 • Terminals: 6.3mm • Operating Temp: -40?c ~ +85?c • Illumination Colour: Amber

All Purpose Switchmode Battery Charger 12/24 Volt 7.5amp 8 Stage Fully Automatic Charge and Maintain with no risk of overcharging Charges all bat...

Powerful Switchmode Battery Charger 12/24 Volt 15amp 9 Stage Fully Automatic Charge, MCU controlled Charges all battery types including Lead Acid...

Professional Switchmode Battery Charger 12/24 Volt 25amp 9 Stage Fully Automatic Charge, MCU controlled Charges all battery types including Lead ...

Versatile Switchmode Battery Charger 12 Volt 3.8amp 7 Stage Fully Automatic Charge and Maintain with no risk of overcharging Charges all battery ...

Maintenance Switchmode Battery Charger 6 / 12 Volt 1amp 5 Stage Fully Automatic Charge and Maintain with no risk of overcharging Charges all batt...

Suits Battery Chargers; HU6550, HU6552 and HU6554 Easily connect and disconnect from any battery Replace a lost connector or add a set to a conve...

Allows you to use on Accessory power sockets & Merit DIN plugs when you remove red tip Compatible with HU6620, HU6620B & HU6628 Specificat...

Features Automatic Input Selection Automatically selects the input, Alternator, Solar, DC, based on the Active input. No manual switching required...

Features Automatic Input Selection Automatically selects the input, Alternator, Solar, DC, based on the Active input. No manual switching required...

Features Automatic Input Selection Automatically selects the input, Alternator, Solar, DC, based on the Active input. No manual switching required...

• 105mm x 42.5mm • Centre to centre 86mm • Hole size 29mm

Includes Accessory Power Socket, Blue illumination Input: 12V-24V DC 50amp Anderson style connector Accessory power socket, 20amp @ 12V (HU6620B...

12/24V DC Includes 2 x 50A Anderson Style connectors Housing is made from nylon & includes M4 stainless mounting screws

Allows you to flush mount two switches, gauges or sockets Suits early Toyota switches, gauges or sockets Note: Switches shown not included

Suits late Toyota switches, gauges or sockets Allows you to flush mount two switches, gauges or sockets

• 100mm x 50mm • Centre to centre 82mm • Hole size 29mm

 This product must be purchased in store, or via a workshop job. Can not be purchased from website and shipped out. The REDARC BCDC1225D In-vehicl...

 This product must be purchased in store, or via a workshop job. Can not be purchased from website and shipped out. The REDARC BCDC1240D In-veh...

Suits early Toyota applications Allows you to check & monitor temperatures in & out of vehicle at one time, includes two temperature probe...

Blue illumination Port 1: Type C Port 2: QC3

Blue illumination Port 1: QC3 Port 2: 2.4amp

90 degree terminals to allow shallow fitment Requires only 25mm in depth to mount Illumination colour: Blue Sealing: IP66 Great for rear trays ...

Illumination Colour: Blue • Input: 12-24V DC • Range Port 1: 2.4amp @ 5V Port 2: 2.4amp @ 5V • Protective plastic cap • Hole size: 29mm • Sea...

Illumination Colour: Blue • Input: 8-32V DC • Range Port 1: QC3.0, 3.6-12V Max 18W Port 2: Type C QC4.0, 5-20V Max 36W • Protective rubber cap ...